Eskil, our CTO & Head of R&D, and Yngve, our Software Engineer, did a test on an adhesive joint showing how dolphicam2 preforms.

TRM IN USE

This demo was done with the TRM-DB-8.0MHz with an 8mm Rexolite coupling.

Material

Two x 0.8 mm steel plates glued together.

Settings

A wide gate was set around several echoes in the plate (you can view the gate in B-scan in pictures below)

The “Jet” color pallette was used and the pallette was compressed, to obtain good color contrast in the C-scan ultrasound image.

Comment

In the video, you clearly can see the adhesive joining the two steel plates.

Starting point

Middle

End point